Main parameters and technical performance

The electronic current limit automatic controller (referred to as current limiter) is suitable for AC 50Hz, working voltage AC220V control circuit, and is powered by rated electric power. When the electric load exceeds the specified range value, the controller automatically cuts off the load power supply, and automatically resets the load power supply after the delay to realize automatic detection control. The product is compact and beautiful in appearance and is mounted in parallel with the DZ47 (C45).

36mm width automatic current limit controller is the second generation automatic line current controller which our company has improved according to market requirements. It has beautiful appearance and small size. It is the same as 2P width size DZ47. The distribution box is reliable and convenient to install. Clear, easy to understand, power supply can not only go up and down, but also can go in and out, greatly satisfying customer requirements.

The main technical parameters

Working voltage: AC220V 50Hz

Protection action current: 0.5A, 1A, 2A, 3A, 4A, 5A, 6A, 7A, 8A, 10A, 16A (other specifications can be customized)

Protection action delay time: 5s (1.2 times) with inverse time characteristics

Automatic reset time: 30s ±5s

Protection action current difference: ±10%

Power consumption: ≤1W

Electrical life: 1x105

Mechanical life: 1x106

Dimensions: 78*36*65mm or 87*50*69mm two sizes to choose from

Installation method: 35mm rail mounting

Use function description

According to the product identification input and output terminals are correctly wired. (The load current should be less than the protection current value of the product)

The two-color LED on the panel indicates the status: when the indicator light is green, the load power is turned on and is in the running state; when the red light is emitted, the protection function is activated and the load power is cut off.

The current-limiting (current) protection action of the current limiter has an inverse time characteristic; that is, the larger the protection current value of the load exceeding the product, the shorter the protection action time of the product, and vice versa.

Dimensions